24/7 Emergency? Call 0401 345 861
Air conditioning · Split systems

Reliable Split System Installation in Armadale, Rockingham & Mandurah

Split systems supplied and installed by licensed electricians, so the unit, the pipework and the electrical circuit are all handled by one team.

AirWatt Electrics electrician wiring an outdoor split system air conditioner
Licensed EC1613524/7 emergency lineAll brands servicedSplit system service $250 + GSTLocal to Armadale

A split system is the most popular way to cool and heat a room in Perth, and for good reason: it is efficient, quiet and quick to install. AirWatt Electrics supplies and installs split system air conditioners across Perth's southern suburbs and down to Mandurah. Because we are licensed electrical contractors (EC16135) as well as air con installers, the electrical side is done properly by the same people who fit the unit.

What a split system installation includes

  • A visit or a few questions up front to work out the right size for the room
  • Advice on where the indoor and outdoor units will work and look best
  • Mounting the indoor unit and outdoor unit on a wall bracket or ground pad
  • Refrigerant pipework, drain and cabling through the wall, neatly covered
  • A dedicated electrical circuit and outdoor isolator where required
  • Commissioning, testing and a walk-through of the remote and settings

Getting the size right

A unit that is too small will run flat out on a 40 degree day and still not keep up. One that is too big costs more to buy and can cycle on and off, which is less comfortable and less efficient. Room size matters, but so do ceiling height, window size and direction, insulation and whether the room opens into a hallway or living area. A west-facing bedroom in Baldivis needs more capacity than the same-sized room on the south side of the house. We take all of that into account before recommending a unit.

Where the units go

The indoor unit needs a clear path for air across the room, away from direct sun on the sensor and not blowing straight onto a bed or couch. The outdoor unit needs airflow around it, a solid mounting surface and a sensible spot for the condensation drain. Where we can, we keep the pipe run short and tidy, which helps efficiency and looks better. If you have a preferred spot, tell us, and we will let you know if it will work.

The electrical side matters

Most split systems above a small bedroom size need their own circuit from the switchboard, and every outdoor unit needs an isolator. In older homes, the switchboard may also need extra protection or more space before a new circuit can be added. Because we are electricians, we check this before installation day and can do any switchboard work at the same time. That means no second trade, no gaps between the two jobs and one point of contact.

Brands we install

We install and service all major brands, including Daikin, Mitsubishi Electric, Fujitsu, Panasonic, Samsung and others. We will recommend a model that suits your room and budget rather than pushing a single brand, and we can install a unit you have already bought if it is suitable.

Replacing an old unit

If your existing split system is noisy, inefficient, leaking or simply not keeping up, replacing it can make a big difference to comfort and running costs. Where the old pipework and location are suitable we may be able to reuse them; otherwise we remove the old unit and install the new one with fresh pipework.

Looking after it after installation

Clean the indoor filters every few weeks during heavy use and keep the outdoor unit clear of leaves and plants. A professional service once a year keeps it efficient and catches small problems early. Our standard split system service is $250 + GST.

How it works

  1. Call or request a quote and tell us the room and what you have in mind.
  2. We confirm sizing, location and any electrical work, then give you a clear price.
  3. We install, commission and test the system, clean up, and show you how to use it.

Areas we cover

We work from Perth's southern suburbs down to Mandurah, including Armadale, Rockingham & Safety Bay and Mandurah. See all our air conditioning and electrical services.

Need it sooner? Our emergency line is answered 24 hours a day on 0401 345 861. Office hours are 7am–5pm Mon–Fri.

FAQ

Split System Installation FAQs

How long does a split system installation take?

Most back-to-back installs are done in a few hours. Longer pipe runs, two-storey homes or switchboard work can take longer, and we will let you know when we quote.

Do I need a new circuit for my split system?

Most split systems beyond small bedroom units need a dedicated circuit, and every outdoor unit needs an isolator. As electricians, we handle that as part of the install.

Can you install a unit I have already bought?

Often, yes. We will check the model and the location are suitable before installation day.

What size split system do I need?

It depends on the room size, ceiling height, windows, insulation and which way the room faces. We work it out with you before recommending a unit.

Do you service split systems too?

Yes. A standard split system service is $250 + GST, all brands.

Related

More from AirWatt Electrics

Other services and the areas we cover, Perth to Mandurah, south of the river.

Electrical services

Power points, lighting, switchboards, solar and EV chargers.

Read more about electrical services →

24/7 emergency electrician

Power out or sparking? Our emergency line is answered 24/7.

Read more about 24/7 emergency electrician →

Electrician in Armadale

Kelmscott, Byford, Bedfordale, Seville Grove and Haynes.

Read more about electrician in Armadale →

Electrician in Rockingham & Safety Bay

Baldivis, Warnbro, Port Kennedy and Kwinana.

Read more about electrician in Rockingham & Safety Bay →

Electrician in Mandurah

Halls Head, Meadow Springs, Falcon and Dawesville.

Read more about electrician in Mandurah →