24/7 Emergency? Call 0401 345 861
Electrical · Safety switches

Reliable Safety Switch Installation & Testing in Armadale, Rockingham & Mandurah

Safety switches (RCDs) installed, tested and fault-found by licensed electricians, so your family is protected from electric shock.

AirWatt Electrics electrician on site at a home south of the river
Licensed EC1613524/7 emergency lineAll brands servicedSplit system service $250 + GSTLocal to Armadale

A safety switch, also called a residual current device or RCD, constantly monitors the electricity flowing through a circuit. If it detects current leaking to earth, which is what happens when someone gets a shock, it cuts the power in a fraction of a second. It is one of the most important safety devices in your home. AirWatt Electrics is a licensed electrical contractor (EC16135) that installs, tests and repairs safety switches across Perth's southern suburbs and down to Mandurah.

Safety switches and circuit breakers are different

Circuit breakers protect your wiring from overloads and short circuits. Safety switches protect people. A home can have a full set of circuit breakers and still have no protection against electric shock. Many newer switchboards use combined RCBO devices that do both jobs for each circuit, which also means a fault on one circuit does not knock out power to the whole house.

Do you have enough safety switches?

Look at your switchboard. Safety switches usually have a test button marked T or Test. If you cannot see any, or there is only one covering a few circuits, your home may not be adequately protected. In Western Australia, homes must have at least two safety switches protecting all power and lighting circuits, including when a home is sold or rented out. If you are not sure what you have, we can check it for you.

Safety switch services

  • Installing new safety switches on existing switchboards where there is room
  • Upgrading to individual RCBO protection on each circuit
  • Testing safety switch trip times and operation
  • Compliance checks for sales and rentals
  • Finding the cause of nuisance tripping
  • Switchboard upgrades where the existing board cannot take new devices

Why does my safety switch keep tripping?

A safety switch that trips is usually doing its job and telling you there is a problem. Common causes include a faulty appliance, water getting into an outdoor power point or light, damaged cabling, an ageing hot water system element, or several circuits sharing one older safety switch so small leakages add up. Try this: turn off and unplug everything on the circuit, reset the switch, then plug things back in one at a time. If it trips when a particular appliance goes on, that appliance is the likely culprit. If it trips with everything unplugged, or will not reset at all, leave it off and call us.

If you are without power to important circuits such as the fridge or medical equipment, call our 24/7 emergency electrician line.

Test your safety switches

Press the test button on each safety switch every three months. It should trip straight away. Reset it and you are done. If it does not trip, it needs checking by an electrician as soon as possible. A good time to remember is when the seasons change.

Outdoor areas and coastal homes

Outdoor circuits are the most common source of tripping in homes near the coast in Rockingham, Safety Bay and Mandurah, where salt air and moisture get into fittings. Pool pumps, garden lighting and air con isolators are frequent offenders. We replace corroded fittings with weatherproof ones and make sure every outdoor circuit is properly protected.

How it works

  1. Call or request a quote and tell us what you have noticed.
  2. We test your switchboard and circuits and explain what we find.
  3. We give you a clear price, then install or repair and test everything.

Areas we cover

We work from Perth's southern suburbs down to Mandurah, including Armadale, Rockingham & Safety Bay and Mandurah. See all our electrical services, air conditioning and our 24/7 emergency electrician line.

Need it sooner? Our emergency line is answered 24 hours a day on 0401 345 861. Office hours are 7am–5pm Mon–Fri.

FAQ

Safety Switch Installation FAQs

How many safety switches does my home need?

In WA, homes need at least two safety switches protecting all power and lighting circuits. We can check what you have.

Why does my safety switch trip when it rains?

Water is likely getting into an outdoor power point, light or fitting. We can find the faulty fitting and replace it.

How often should I test my safety switches?

Press the test button every three months. If it does not trip, call an electrician.

Can you add safety switches to my old switchboard?

Sometimes, if there is room and the board is suitable. Otherwise a switchboard upgrade may be the better option.

What are your hours?

7am–5pm Mon–Fri, plus 24/7 emergency line.

Related

More from AirWatt Electrics

Other services and the areas we cover, Perth to Mandurah, south of the river.

Air conditioning installation & servicing

Split system, ducted and evaporative. All brands.

Read more about air conditioning installation & servicing →

24/7 emergency electrician

Power out or sparking? Our emergency line is answered 24/7.

Read more about 24/7 emergency electrician →

Electrician in Armadale

Kelmscott, Byford, Bedfordale, Seville Grove and Haynes.

Read more about electrician in Armadale →

Electrician in Rockingham & Safety Bay

Baldivis, Warnbro, Port Kennedy and Kwinana.

Read more about electrician in Rockingham & Safety Bay →

Electrician in Mandurah

Halls Head, Meadow Springs, Falcon and Dawesville.

Read more about electrician in Mandurah →